Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It is discrete, does not use LED indicators or key fobs and is hidden within the vehicle's wiring.
It also allows users to disable the system temporarily by using Transport Mode to use it when they are renting their vehicle. This guide will take you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key cloning attacks, hacking attacks and relay attacks. The system is directly connected to the ECU of your car and protected by a pin code that you choose. ghost autowatch immobiliser to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled by circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a clean connection to the ECU of your vehicle. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complement the protection package for your vehicle.
First, the installer needs to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After this is completed the installer is now able to begin work. Basic hand tools can be used to make precise connections. A multimeter is useful to verify electrical values. Insulation tape and cable tie are essential to protect connections and ensure that wiring is neat. The Ghost Immobiliser user's guide will give specific instructions that are specific to your particular model.
It is essential to choose a grounding location that is free of dirt or paint during installation. The installer must also make sure the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. Based on the model, these wires may require soldering or plugged into. A quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the customer after the installation is completed. This allows valet parking or mechanics to access the vehicle without knowing the pin code. To do this, the customer has to press the service button on the dashboard five times within 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's an excellent choice for those who rent their vehicles frequently through platforms like Turo. An immobiliser can reduce insurance rates, as it lowers the chance of theft.
Getting Started
You won't have a problem with an autowatch immobiliser if you want to protect your car from thieves. The device protects your vehicle from starting even when a criminal steals or copies the key. It's possible because of its advanced technology that prevents the engine from starting until the correct PIN code has been entered.
The device connects to the CAN bus network in your vehicle and allowing it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your car. This is the most secure way to safeguard your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing Ghost's immobiliser is straightforward however, you must follow the steps to avoid electrical problems and system malfunctions. First, you have to locate and identify a constant 12V power source and an adequate grounding point on the chassis of your vehicle. After that, you are able to begin to connect the wires for the immobiliser. Make sure you use top-quality connectors and soldering methods to ensure a secure connection. Connect the connections with heat shrink tubing, insulation tape or other materials to avoid electrical short circuits.
After the wires are connected, you are able to connect the battery and start the engine to test whether the immobiliser works. If everything is functioning properly you can place it in a secure location beneath the dash or anywhere else in the vehicle. Make sure to hide it well to prevent thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a top-quality deterrent for car thieves. It is invulnerable to key cloning and hacking and is not able to be disabled without the code. The device is also easy to use and can be put into an auto valet mode so that your automobile isn't activated if you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. The Ghost Immobiliser will not interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. This is because the system does not transmit and receive radio frequency signals, and it utilizes CAN data to communicate with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
Enter your disarm sequence (either two or one buttons) and then switch on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. You can now start your vehicle and drive safely.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while also protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to give your car to service or valet parking.
You'll require a constant power source (12V) in addition to a grounding source to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and able to be touched. It's also recommended to use cable tie to secure and bundle the wires, since this reduces the risk of tampering by potential thieves. To avoid committing mistakes, make sure to double-check these points and mark them with the use of tape or labels. Check all connections for signs that they are wearing out. Connections that are loose can cause malfunctions in the system, so make sure they're securely in place and securely insulated. Don't forget to test the Ghost Immobiliser after installation is complete. This will make sure that the unit functions correctly and that all connections and insulation are secure. If there are any issues, make sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your vehicle's ECU in order to prevent unauthorised motor starting. Its cutting-edge technology safeguards your car against key cloning, hacking, and other typical tactics thieves employ to steal cars. The Ghost also works in tandem with existing alarm and tracking systems to offer the best protection for your vehicle. The Ghost's unique features and secluded design make it a preferred choice for car lovers and security-conscious motorists alike.
It is important to follow the procedures for installation to ensure a proper integration of Ghost Immobiliser. Refer to the wiring diagram of your vehicle to assist you in locating and connecting the wires. You'll need to determine the grounding and power sources. Once you've found them, you'll have to mark them in a way that they're easily identifiable during the installation process. ghost immobiliser 2 is also vital to use only the best tools and materials. Basic hand tools can help you make precise connections. A multimeter will verify electrical values and guarantee security. Insulation tape and cable ties will keep the connections tidy and neat. Additionally, a user's manual will give specific guidelines specifically tailored to your Ghost model.
Before beginning the installation it is important to test the system by entering the PIN code and then starting the vehicle. This will ensure that the immobiliser is working according to plan, and prevents unauthorised vehicle start-ups. It's recommended to perform this step regularly as part of your routine inspections of the vehicle to ensure the system is operating correctly.
After ghost immobiliser 2 is completed After the installation is completed, you are able to drive your vehicle with confidence. The Ghost will guard your pride and joy from potential car thieves. It will ensure that no one can escape with your car even if they don't have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker, which detects attempts to steal or tamper with. This will allow you to track your vehicle if it is stolen.
The Ghost is compatible with a range of vehicles, including those made by most major manufacturers. If you're looking to secure your vehicle with this cutting-edge device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards in the installation of our products. This reassures customers, insurers and law enforcement agencies that all installations are completed in a safe and correct manner.